1.2 Dry conditions not subject to condensation
1.3 Indoors at a temperature between 50°F and 90°F
1.4 Indoors at a temperature between 60°F and 100°F
1.5 Temperature controlled between 40°F and 80°F
1.6 Temperature controlled between 40°F and 60°F
1.7 Temperature controlled between 32°F and 40°F
1.8 Temperature controlled at 0°F and below
1.9 Temperature controlled at minus 20°F and below
2.1 Temperature controlled at minus 40°F and below
2.2 Protected from direct sunlight, neon light and elements
2.3 Electrically ground drums when stored indoors
2.4 Protected from direct heat and open flame
2.5 Heated to 250 ± 25°F until required for use
2.6 Protected from ultraviolet light
2.7 Temperature controlled between 40°F and 77°F
2.8 Temperature controlled between 32°F and 41°F as per MPS 204-3
2.9 Temperature controlled at 0°F or lower as per MPS 204-3
3.1 Vertically in original shipping container at controlled temperature between 41°F and 77°F
3.2 Temperature controlled between 41°F and 77°F in original unopened shipping container
3.3 Temperature controlled at 50°F and 68°F including special conditions defined in IGC 04.36.100
3.4 Part A (Resin) yellow paste only, store at temperature controlled between 32°F and 41°F per storage code B
3.5 Temperature controlled at 80°F or below
3.6 Temperature controlled at 32°F or below
3.7 Temperature controlled at 40°F or below
3.8 Protected from dents, scratches and all damages
3.9 Materials consisting of two or more components shall be stored and maintained at all times in the form of the original procured kit.
4.0 Indoors at a temperature between 32°F and 100°F, away from ignition sources.
4.1 Supported film shall be stored at 0°F or below and unsupported.
4.2 All containers should be grounded when material is transferred.
4.3 Temperature Controlled between 80°F and 100°F
4.4 Temperature controlled at 10F and below
4.6 Indoors at a temperature between 60 Fahrenheit degrees and 77 Fahrenheit degrees
4.7 Tubes must be stored with tips down
4.8 Temperature controlled between 35 to 55 F.
4.9 Indoor temperature between 67 F and 87 F.
5.0 Temperature controlled between 40 F and 50 F
5.1 Temperature controlled between 77F and 90F
5.2 Store horizontally on a flat surface
5.3 Temperature controlled between 35F to 77F
5.4 Temperature controlled between 40°F and 100°F
5.5 Indoors at a temperature between 50F and 70F
5.6 Stored flat or on a "horse" (Rounded A-frame).
5.7 Store per material specification requirements
5.8 Must be stored in sealed unopened canisters
5.9 Temperature controlled between 55F and 75F and at a maximum relative humidity of 60%