PPS 10.01 - Handling, Care and Finishing of Transparent Parts

PPS 10.02 - Coating of Metal Skis - Cancelled

PPS 10.03 - Optical Testing of Laminated Acrylic (Plexiglass) - Cancelled

PPS 10.04 - Wet Lay-Up of Glass Fabric/Polyester Resin Laminates

PPS 10.05 - Application of TBS-757 Foam - Cancelled

PPS 10.06 - Repairs to Wet Lay-Up Glass Fabric/Polyester and Epoxy Resin Laminates - Cancelled

PPS 10.07 - Fabrication and Installation of Anti-Scuff Pads - Cancelled

PPS 10.08 - Forming Thermoplastic Sheet

PPS 10.09 - Fabrication of Polyester/Synthetic Organic Fabric Laminates - Cancelled

PPS 10.10 - Fabrication of Polyurethane Foam

PPS 10.11 - Fabrication of Polycarbonate Parts - Cancelled

PPS 10.12 - Potting of Aircraft Parts and Assemblies

PPS 10.13 - Application of Polyethylene Ski Film - Cancelled

PPS 10.14 - Teflon Coating

PPS 10.15 - Wet Lay-Up Fabrication of Epoxy Resin/Glass Fabric Reinforced Laminates

PPS 10.16 - Installation of Heat Shrinkable Tubing, Tape and Identification Sleeves

PPS 10.17 - Machining of Plastics

PPS 10.19 - Manufacture of DHC-6 U/C Shock Absorber Blocks and Rebound Assemblies - RESTRICTED (for a copy of this PPS, please contact Christie Chung at x37641 or christie.chung@aero.bombardier.com)

PPS 10.20 - Set-Up and Operation of the Waterjet

PPS 10.21 - Certification of Autoclaves

PPS 10.22 - Preparation of Moulds

PPS 10.23 - Storage, Handling and Preparation of Pre-Impregnated Materials

PPS 10.24 - Preparation of Honeycomb Cores for Lay-Up in Sandwich Panel Assemblies

PPS 10.25 - Storage and Application of Film Adhesives used in Composite Assemblies

PPS 10.26 - Platen Press Curing of 250F Cure, Epoxy Resin Pre-Impregnated, Fibre Reinforced Composite Parts

PPS 10.28 - Assembly of Wire Thermocouples

PPS 10.29 - Fabrication of the DHC-6 Fibreglass Nose - Cancelled

PPS 10.30 - Casting of Synthetic Resins

PPS 10.31 - Coating of Hysol 208S HCI - Cancelled

PPS 10.32 - Application of Devcon Putty

PPS 10.33 - Fabrication of 250F Cure Graphite Fibre Reinforced Parts - Cancelled

PPS 10.34 - Fabrication of 250F Cure Glass/Aluminized Glass Fibre Epoxy Parts - Cancelled

PPS 10.35 - Fabrication of 250F Cure Epoxy Resin Pre-Impregnated, Fibre Reinforced Composite Parts

PPS 10.36 - Flammability Compliance Test Procedure

PPS 10.38 - Repair of Decorative Film Covered Components

PPS 10.39 - Machining of Fibre Reinforced Composite Parts

PPS 10.40 - Repairs to Laminates & Sandwich Panels

PPS 10.41 - Fabrication of Pre-Impregnated Polyester Resin/Glass Fabric Laminates - Cancelled

PPS 10.43 - Fabrication of 350F Cure Epoxy Resin Pre-Impregnated, Fibre Reinforced Composite Parts

PPS 10.44 - Application of Liquid Shims

PPS 10.46 - Application of Decorative Film

PPS 10.48 - Fabrication of 280F Cure, Phenolic Resin Pre-Impregnated, Fibre Reinforced Composite Parts

PPS 10.49 - Machining of Graphite/Glass Fibre Reinforced Phenolic Parts - Cancelled

PPS 10.50 - Cut and Fold Panel Structure Fabrication

PPS 10.51 - Certification of Ovens

PPS 10.52 - Certification of Platen Press

PPS 10.59 - Manufacture of Net Resin System Epoxy Composite Components (179C Autoclave Cure)
 

Alphabetical PPS Listings

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

---

Numerical PPS Listings

0.XX	1.XX	2.XX	3.XX	4.XX	5.XX	6.XX	7.XX	8.XX	9.XX
10.XX	11.XX	12.XX	13.XX	14.XX	15.XX	16.XX	17.XX	18.XX	19.XX
20.XX	21.XX	22.XX	23.XX	24.XX	25.XX	26.XX	27.XX	28.XX	29.XX
30.XX	31.XX	32.XX	33.XX	34.XX	35.XX	36.XX	37.XX	38.XX	39.XX
40.XX	41.XX	42.XX	43.XX

---

Page created and maintained by:
christie.chung@dehavilland.com